Crypto Mining Shop

MicroBT Whatsminer M63S+ Hydro Bitcoin SHA-256 ASIC miner, 2U 19-inch hydro-cooled rack chassis with front handles, network panel and power inlet, sold by Sell Your PC South Africa

MicroBT Whatsminer M63S+ Hydro Bitcoin Miner

R79400

The Whatsminer M63S+ Hydro mines Bitcoin (BTC) on SHA-256 at 392–414 TH/s and 17–17.5 J/TH, drawing about 6,698–7,245W. It is water-cooled with a built-in power supply in a 2U rack chassis, and in South Africa it runs on a commercial 400V three-phase supply.

Product Description

Product Overview

The Whatsminer M63S+ Hydro takes MicroBT’s M63 family down to 17 J/TH. It is a water-cooled SHA-256 miner for Bitcoin (BTC), Bitcoin Cash (BCH) and Bitcoin SV (BSV), listed in our Hydro Immersion Bitcoin Miners range. MicroBT released it in mid-2024 as the efficiency step above the MicroBT Whatsminer M63S Hydro.

The nominal rating is 390–450 TH/s at 17 J/TH, and both of our batches sit inside that hashrate range. The 394–400 TH/s batch runs at the rated 17 J/TH. The 392–414 TH/s batch runs at 17.5 J/TH, within MicroBT’s ±5% efficiency tolerance. Against the M63S at its nominal 18.5 J/TH, the M63S+ needs about 8% less energy for each terahash.

It keeps the family’s 2U, 19-inch rack format and built-in three-phase power supply. At 29.5 kg net it is 2 kg heavier than the M63 and M63S, so check cabinet rails and lifting arrangements before installation.

Key Features

  • 17 J/TH rating: MicroBT’s efficiency step above the M63S, in the same rack format.
  • Batches inside the nominal range: Both batches fall within MicroBT’s 390–450 TH/s rating, so output is predictable.
  • Narrow power band: About 6,698–7,245W across both batches, which keeps circuit and cooling design simple.
  • Three-phase PSU in the unit: AC 380–480V feeds the miner directly, with input up to 10 kW.
  • No fans on the miner: Hydro cooling keeps the mining floor far quieter than an air-cooled farm.

Technical Specifications

  • Model: MicroBT Whatsminer M63S+ (hydro)
  • Released: Mid-2024
  • Algorithm: SHA-256 (BTC, BCH, BSV)
  • Hashrate: 394–400 TH/s or 392–414 TH/s, as selected
  • Efficiency: 17 J/TH or 17.5 J/TH, by batch
  • MicroBT nominal rating: 390–450 TH/s at 17 J/TH
  • Power consumption: About 6,698–6,800W (17 J/TH) or 6,860–7,245W (17.5 J/TH)
  • Tolerance: Hashrate ±10%, efficiency ±5%
  • Cooling: Water-cooled (hydro), about 1 L of coolant inside
  • Coolant: Pure or distilled water with MicroBT’s corrosion inhibitor (pH 7–8.7), antifreeze where needed
  • Inlet water: 25–55°C normal mode, 25–45°C high-performance mode, stable within ±2°C
  • Outlet water: Up to 70°C
  • Flow rate: At least 10 L/min (11 L/min or more with 30% glycol, inlet 20–49°C)
  • Pressure: Up to 400 kPa; drop about 68 kPa at 10 L/min
  • Water connectors: Male M16 x 1.0 stainless steel quick-connectors; female G1/4 or 12 mm barb for 10 mm ID PTFE tube; blue in, red out
  • Input power: AC 380–480V three-phase with earth (3W + ground, no neutral), up to 10 kW
  • Power cable: Custom, rated at least 16A (optional 4 x 2 mm²)
  • Power supply: Built in
  • Network: Ethernet
  • Humidity: 5–85% RH, non-condensing
  • Form factor: 2U, standard 19-inch cabinet
  • Dimensions: 86 x 482.6 x 663 mm with handles
  • Weight: 29.5 kg net, 32 kg gross

Power & Installation Notes

The M63S+ Hydro is a three-phase machine. It accepts AC 380–480V with earth and no neutral (MicroBT’s “3W + ground”), through a cable rated at least 16A. South African sites feed it from a commercial 400V three-phase board, wired by a registered electrician to SANS 10142. A 230V household circuit cannot carry it, because a 16A domestic circuit should stay under about 2,944W of continuous load, well below the M63S+’s 6.7–7.2kW.

Cooling runs through a closed water loop. Choose pumps that deliver at least 10 L/min per unit at up to 400 kPa, allowing about 68 kPa of pressure drop across each miner, and reject the heat through a dry cooler or cooling tower. Fill with pure or distilled water and MicroBT’s corrosion inhibitor at pH 7–8.7.

After load shedding, bring the pumps back before the miners and protect the supply against surges. The plant room needs ventilation for pumps and pipework, while most of the heat leaves outdoors through the cooler.

Electricity Cost Context (South Africa)

One M63S+ Hydro running all day at an indicative R2.80/kWh costs about R13,503 to R14,606 a month across both batches.

(6,698 / 1,000) x 24 x 30 x R2.80 = about R13,503 a month (394 TH/s, 17 J/TH)
(7,245 / 1,000) x 24 x 30 x R2.80 = about R14,606 a month (414 TH/s, 17.5 J/TH)

Tariffs vary by municipality, so substitute the rate from your own bill. This is an operating cost estimate, not a profitability projection.

Ideal Use Cases

  • Higher-tariff sites: At 17–17.5 J/TH, each terahash costs less to run than on the M63 or M63S.
  • Replacing 19–22 J/TH hydro units: More hashrate from a similar 7kW draw in the same 2U slot.
  • Predictable capacity planning: Both batches sit inside MicroBT’s nominal range, which simplifies fleet forecasts.

Frequently Asked Questions

Can the M63S+ Hydro run on a South African home supply?
No. It needs AC 380–480V three-phase with earth, so plan a commercial 400V three-phase connection installed by a registered electrician to SANS 10142.

Which coins and pools does it support?
Bitcoin (BTC), Bitcoin Cash (BCH) and Bitcoin SV (BSV). Any SHA-256 pool works once you enter its stratum address, your worker name and your payout wallet.

How is it cooled, and how loud is it?
By water, through a loop with pumps and a dry cooler or cooling tower. The unit has no high-speed fans, so the floor is far quieter than with air-cooled miners.

Should I choose the M63S+ or the M63S++?
The MicroBT Whatsminer M63S++ Hydro is rated at 434–478 TH/s and 15.5 J/TH, so it does more work per kilowatt. The M63S+ suits buyers who want MicroBT’s 17 J/TH tier. Air-cooled options are in our Bitcoin (BTC) ASIC Miners range.

What’s Included

  • 1 x MicroBT Whatsminer M63S+ Hydro miner (batch as selected)
  • Integrated power supply (built into the unit)
  • Male quick-connectors on the water inlet and outlet
  • Power cable and female water connectors (confirm inclusion at time of purchase)

You may also like…