Crypto Mining Shop

MicroBT Whatsminer M66 240–246Th Immersion Bitcoin SHA-256 ASIC miner, immersion-cooled chassis with front handles, open hashboard slots and Whatsminer label, sold by Sell Your PC South Africa

MicroBT Whatsminer M66 240–246Th Immersion Bitcoin Miner

R45400

The MicroBT Whatsminer M66 is an immersion-cooled SHA-256 Bitcoin (BTC) miner. This batch runs at 240–246 TH/s, rated by the supplier at 21 J/TH, for about 5,040–5,166W. It takes inlet fluid up to 55°C and needs AC 380–480V, so in South Africa plan for a commercial 400V three-phase supply.

Product Description

Product Overview

The MicroBT Whatsminer M66 is the base model of MicroBT’s M66 immersion series, launched on 26 October 2023 alongside the M66S, with the M66S+ following in mid-2024. MicroBT makes the Whatsminer range. The M66 runs the SHA-256 algorithm and mines Bitcoin (BTC), Bitcoin Cash (BCH) and Bitcoin SV (BSV) while submerged in dielectric fluid. You will find it in our Hydro Immersion Bitcoin Miners category.

MicroBT’s nominal rating for the M66 is 240–276 TH/s at 19.9 J/TH. This batch sits inside that hashrate range at 240–246 TH/s, towards its lower end. The supplier rates these units at 21 J/TH, which is outside MicroBT’s efficiency band of 19.9 J/TH ±5% (up to about 20.9 J/TH), so each terahash uses slightly more energy than MicroBT’s nominal figure. Power works out at about 5,040–5,166W per unit.

Some listings describe the M66 and M66S as hydro miners. MicroBT classes both as immersion units, and this page follows MicroBT. The Whatsminer M66 immersion miner’s strongest trait is its tolerance for warm fluid, which matters on a hot South African site.

Key Features

  • Warm-fluid tolerance: Accepts inlet fluid at 25–55°C in normal mode.
  • 240–246 TH/s batch: Inside MicroBT’s nominal 240–276 TH/s range.
  • Supplier-rated 21 J/TH: Outside MicroBT’s ±5% band around 19.9 J/TH, and stated here plainly.
  • Sealed from dust and humidity: The insulating fluid keeps both off the hashboards.
  • Integrated PSU: The power supply is built in and fed at AC 380–480V.

Technical Specifications

  • Manufacturer: MicroBT
  • Model: Whatsminer M66 (immersion)
  • Launched: 26 October 2023
  • Algorithm: SHA-256
  • Mineable coins: Bitcoin (BTC), Bitcoin Cash (BCH), Bitcoin SV (BSV)
  • Nominal hashrate: 240–276 TH/s (MicroBT)
  • Nominal efficiency: 19.9 J/TH (MicroBT)
  • This batch: 240–246 TH/s at 21 J/TH (supplier rating)
  • Power consumption: About 5,040–5,166W (batch hashrate x 21 J/TH)
  • Tolerance: Hashrate ±10%, efficiency ±5%
  • Cooling: Immersion in Shell S5X or S3X insulating fluid
  • Fluid flow: At least 24 L/min per unit, bottom in, top out
  • Inlet fluid temperature: 25–55°C normal mode, 25–45°C high-performance mode, held within ±2°C
  • Input: AC 380–480V
  • Power cable: Rated at least 16A (optional 4 x 2 mm² cable)
  • Power supply: Built in
  • Network: Ethernet
  • Dimensions: 267.5 x 147 x 401 mm (with handles)
  • Weight: 16 kg net, 17 kg gross

Power & Installation Notes

MicroBT specifies AC 380–480V input for the M66. A South African home runs on 230V single-phase at 50Hz, so the miner will not work from a domestic socket, and its draw of more than 5kW is well beyond the roughly 2,944W a 16A domestic circuit should carry continuously. MicroBT does not state the phase arrangement, so plan for the 400V three-phase supply found in commercial premises and let a registered electrician confirm and certify the wiring under SANS 10142. The power cable must be rated at least 16A, with a 4 x 2 mm² cable listed as an option.

Heat leaves the M66 through the fluid. The installation needs an immersion tank, circulation pumps, a heat exchanger and a dry cooler, with at least 24 L/min flowing through each unit from the bottom up. The 25–55°C inlet window (25–45°C in high-performance mode) helps through Highveld and Lowveld summers, but the inlet temperature must hold within ±2°C, so the loop needs proper control.

During load shedding the miners, pumps and dry cooler all stop. On restoration, run the pumps and cooler first, then the miners, and protect the supply against surges.

Electricity Cost Context (South Africa)

At about 5,040–5,166W, one M66 uses roughly 121–124 kWh a day, which at an indicative R2.80/kWh is about R10,161 to R10,415 a month for the miner, with pumps and dry cooler on top. The supplier’s 21 J/TH rating makes this higher than MicroBT’s nominal 19.9 J/TH would give.

(5,040 / 1,000) x 24 x 30 x R2.80 = about R10,161; (5,166 / 1,000) x 24 x 30 x R2.80 = about R10,415 per month

Municipal tariffs differ, so check the rate on your own account. Treat this as an operating cost estimate, not a profitability projection.

Ideal Use Cases

  • Hot-climate sites: Suits sites where a dry cooler cannot bring fluid down far in summer.
  • Heat reuse: Warm fluid at the heat exchanger can feed low-temperature heating such as drying rooms.
  • Mixed M66-series tanks: Same size and 24 L/min flow requirement as the M66S and M66S+.

Frequently Asked Questions

Will the M66 run on South African power?
Only on a commercial supply. It needs AC 380–480V, which rules out the 230V single-phase supply in homes. Plan for 400V three-phase, wired by a registered electrician to SANS 10142.

Why is this batch rated at 21 J/TH when MicroBT quotes 19.9 J/TH?
That is the supplier’s rating. MicroBT’s ±5% tolerance reaches about 20.9 J/TH, so 21 J/TH is just outside it, while the 240–246 TH/s hashrate is inside MicroBT’s range.

Which coins and pools does it support?
Bitcoin (BTC), Bitcoin Cash (BCH) and Bitcoin SV (BSV), on any SHA-256 pool, configured over Ethernet.

What else do I need to cool it?
A tank of Shell S5X or S3X insulating fluid, pumps delivering at least 24 L/min per unit, a heat exchanger and a dry cooler.

How does it compare with the M66S and M66S+?
The MicroBT Whatsminer M66S Immersion runs at a supplier-rated 18 J/TH and the MicroBT Whatsminer M66S+ Immersion at 17 J/TH, so both produce more hashrate per kilowatt-hour. If you prefer a water loop to a fluid tank, see the Bitmain Antminer S21e Hydro 338T.

What’s Included

  • 1 x MicroBT Whatsminer M66 immersion miner
  • Built-in power supply (PSU)
  • Lifting handles on the unit