Product Overview

The Jasminer X16-Q 1750M 8G is a dedicated EtcHash algorithm ASIC miner designed for Ethereum Classic (ETC) and other EtcHash-compatible cryptocurrencies. Delivering 1,750 MH/s at approximately 575W, the X16-Q 1750M 8G is the mid-tier variant in Jasminer’s X16-Q series — offering slightly lower hashrate than the 1950M but at correspondingly lower power consumption. The “8G” designation refers to the onboard memory specification.

Jasminer has built a reputation for producing EtcHash miners that prioritise power efficiency and quiet operation over raw hashrate. The X16-Q 1750M 8G reflects this philosophy — delivering solid ETC mining output at a wattage that makes it one of the most accessible ASIC miners for home and small-scale operations. At 575W, it draws less power than many desktop computers running at full load, yet delivers dedicated ASIC mining efficiency far beyond what GPU mining can offer on the ETC network.

For South African ETC miners, the X16-Q 1750M 8G represents an excellent balance of performance, power consumption, and operational practicality. Its low wattage means it can run on standard household electrical infrastructure, sustain operation on a home inverter during load shedding, and operate quietly in a home environment — advantages that are difficult to find in higher-wattage mining hardware.

Key Features

• 1,750 MH/s EtcHash Hashrate (±5%): Solid ETC mining output from a low-power ASIC. The X16-Q 1750M 8G delivers steady pool contributions with strong per-watt efficiency.
• 575W Power Consumption (±10%): Exceptionally low wattage for a dedicated ETC ASIC miner. At 575W, this unit draws less power than many standard appliances and is well within the range of home electrical circuits and inverter backup systems.
• Excellent Efficiency at ~0.33 J/MH: Among the best power efficiency ratios available for ETC mining. Lower electricity cost per unit of hashrate is especially valuable in South Africa’s high residential electricity tariff environment.
• Quiet Integrated Cooling: Jasminer’s cooling design operates at lower noise levels than conventional ASIC fans — making the X16-Q 1750M 8G one of the more home-office and residential-friendly mining options available.
• Integrated PSU: Includes a built-in power supply — no separate PSU purchase required. Plug into standard mains power and Ethernet to begin mining ETC.
• EtcHash ASIC Architecture: Purpose-built for EtcHash, significantly outperforming GPU-based ETC mining in both hashrate and energy efficiency per unit of output.
• Load-Shedding Resilient: At 575W, this is one of the most inverter-friendly dedicated ETC ASICs available — a key practical advantage for South African home miners.

Technical Specifications

• Algorithm: EtcHash (Ethash variant)
• Supported Coins: Ethereum Classic (ETC) and EtcHash-compatible cryptocurrencies
• Hashrate: 1,750 MH/s (±5%)
• Power Consumption: ~575W (±10%)
• Power Efficiency: ~0.33 J/MH
• Memory: 8G
• Cooling: Integrated low-noise cooling system
• Input Voltage: 200–240V AC, 50/60 Hz
• Networking: 1× RJ45 Ethernet
• Operating Temperature: 0°C to 35°C
• Dimensions: Confirm with supplier at time of purchase
• Net Weight: Confirm with supplier at time of purchase
• Power Supply: Integrated (included)

Power & Installation Notes

The Jasminer X16-Q 1750M 8G draws approximately 575W — among the lowest wattage of any dedicated ETC ASIC miner. In South Africa, a standard 10A or 16A circuit can comfortably handle this unit. A dedicated circuit is recommended for any mining equipment, but at 575W, the X16-Q 1750M 8G is significantly more flexible from an electrical planning perspective than high-wattage alternatives.

South Africa’s 230V / 50Hz grid supply is compatible with the unit’s 200–240V input specification. The integrated PSU handles South African mains voltage directly — no transformer or external PSU is needed. Wiring must comply with SANS 10142 for any dedicated circuit work; engage a registered electrician as needed.

Load shedding resilience is excellent for this unit. At approximately 575W, a 2 kVA inverter with a 5 kWh battery bank can sustain the X16-Q 1750M 8G for approximately 8–9 hours of operation — enough to maintain mining through most Stage 4 load-shedding cycles on a single charge. This is one of the best load-shedding profiles of any ETC ASIC miner, making it highly practical for South African home miners.

Cooling requirements are minimal compared to high-wattage ASICs. The Jasminer’s integrated cooling and lower heat output allow deployment in a well-ventilated home room without industrial extraction. Standard room ventilation is typically sufficient, though good airflow is always beneficial.

Electricity Cost Context — South Africa

At Eskom’s approximate residential reference tariff of R2.80/kWh, the monthly electricity operating cost for the Jasminer X16-Q 1750M 8G is estimated as follows:

(575 ÷ 1,000) × 24 × 30 × 2.80 = R1,159.20 per month

This is an operating cost estimate only — not a profitability projection. Actual electricity tariffs vary by municipality and supply category. At approximately R1,159/month, the X16-Q 1750M 8G has one of the lowest electricity operating costs of any dedicated ETC ASIC — a significant advantage for South African home miners operating on residential tariffs. Always verify your specific tariff before modelling ETC mining economics.

Ideal Use Cases

• Home ETC mining with minimal infrastructure: The X16-Q 1750M 8G’s 575W draw, quiet operation, and integrated PSU make it the ideal ETC miner for South African home environments where noise, heat, and electrical load are constraints.
• Maximum load-shedding uptime: At 575W, this is one of the best ETC miners for maintaining operation through South African load-shedding stages on a standard home inverter and battery system.
• Efficiency-first mining approach: For operators who prioritise minimising electricity cost per MH/s — particularly important at South African residential tariffs — the X16-Q 1750M 8G’s ~0.33 J/MH efficiency is among the best available for ETC hardware.
• Diversified mining alongside Bitcoin: Operators already running Bitcoin (BTC) SHA-256 miners can add ETC exposure through a Jasminer X16-Q 1750M 8G without significant additional electrical infrastructure investment.

Frequently Asked Questions

Does the Jasminer X16-Q 1750M 8G work on South African power?
Yes. South Africa’s 230V / 50Hz supply is within the unit’s 200–240V input range. The integrated PSU handles South African mains voltage directly. A dedicated 16A circuit is recommended.

What is the difference between the 1750M 8G and the 1950M?
The 1950M offers 200 MH/s more hashrate at approximately 620W vs 575W for the 1750M 8G. Both share the same Jasminer X16-Q architecture. Choose the 1950M for maximum hashrate; choose the 1750M 8G for slightly lower electricity consumption and cost.

Can the X16-Q 1750M 8G run during load shedding?
Yes — at 575W, a 2 kVA inverter with a 5 kWh battery can sustain this miner for approximately 8–9 hours. This makes it one of the best ETC miners for load-shedding resilience in South Africa. Verify your inverter’s continuous output rating before use.

What mining pool should I use?
Major EtcHash/ETC pools include 2Miners, Antpool, ViaBTC, and F2Pool. Configure the pool’s stratum URL in the miner’s web interface and enter your ETC wallet address as the worker ID.

Is the X16-Q 1750M 8G quiet enough for a home office?
Jasminer units are among the quietest ASIC miners available. While not completely silent, the X16-Q 1750M 8G operates at significantly lower noise levels than conventional ASIC hardware — suitable for a dedicated home room or well-insulated garage.

What’s Included

• 1× Jasminer X16-Q 1750M 8G mining unit (with integrated PSU)
• Power cable
• Ethernet cable (confirm at time of purchase)
• Quick-start documentation