Product Overview

The Fluminer L2 1.2G is a compact Scrypt algorithm ASIC miner delivering 1.2 GH/s for Litecoin (LTC) and Dogecoin (DOGE) merged mining. The L2 sits as the compact, lower-power model in Fluminer’s Scrypt lineup — below the L1 5.3G and L1 Pro 6G in hashrate but offering a proportionally lower power draw that makes it accessible for home miners who want merged LTC/DOGE mining without the wattage demands of larger Scrypt hardware.

Fluminer’s L2 targets the home enthusiast and small-scale operator segment. At 1.2 GH/s, the L2 delivers real Scrypt dual-coin mining output — both Litecoin and Dogecoin block rewards proportional to pool share — from a unit with a power footprint more typical of a small home appliance than an industrial miner. This makes it a practical choice for South African home miners who want Scrypt mining with genuine load-shedding resilience.

The L2 can function effectively alongside other home miners in a diversified mining portfolio. Operators who already run Bitcoin (BTC) SHA-256 miners can add LTC/DOGE Scrypt exposure through the L2 with minimal additional electrical overhead.

Key Features

• 1.2 GH/s Scrypt Hashrate (±5%): Dedicated LTC and DOGE dual merged mining from a compact home-scale ASIC. Real Scrypt pool contributions with manageable power draw.
• Dual LTC + DOGE Merged Mining: Both Litecoin and Dogecoin earned simultaneously from every submitted share — two revenue streams from a single machine at no additional power cost.
• Home-Scale Power Consumption: Low wattage suitable for standard home electrical environments. Runs on a standard dedicated circuit without industrial infrastructure.
• Compact Form Factor: Small chassis suitable for desktop shelf or compact rack mounting. Designed for home mining setups rather than commercial rack deployments.
• Load-Shedding Friendly: At home-scale wattage, the L2 is suitable for inverter backup during South African load-shedding periods.
• Standard Ethernet Interface: RJ45 connectivity for pool configuration and monitoring.
• Quiet Operation: Lower noise level than large commercial Scrypt machines due to lower power draw and modest heat generation.

Technical Specifications

• Algorithm: Scrypt
• Supported Coins: Litecoin (LTC), Dogecoin (DOGE), and other Scrypt-based cryptocurrencies
• Hashrate: 1.2 GH/s (±5%)
• Power Consumption: Confirm with supplier at time of purchase
• Cooling: Air-cooled (home-scale)
• Input Voltage: 100–240V AC, 50/60 Hz
• Networking: 1× RJ45 Ethernet
• Operating Temperature: 0°C to 40°C
• Form Factor: Compact desktop/shelf
• Power Supply: Confirm inclusion at time of purchase

Power & Installation Notes

The Fluminer L2’s power draw should be confirmed at time of purchase. For a compact Scrypt miner at 1.2 GH/s, wattage is typically in the 200–400W range — accessible for standard home electrical environments. South Africa’s 230V / 50Hz supply is compatible. A dedicated 16A circuit is recommended.

Load shedding resilience is one of the L2’s advantages — at its compact wattage, a standard home inverter and battery can sustain it through typical South African load-shedding periods. Confirm exact wattage for accurate runtime estimates.

Electricity Cost Context — South Africa

The exact monthly electricity cost depends on the confirmed wattage. Using R2.80/kWh as reference: (Watts ÷ 1,000) × 24 × 30 × 2.80 = Monthly cost. As reference: 300W costs approximately R604.80/month. Confirm wattage at time of purchase. This is an operating cost estimate only.

Ideal Use Cases

• Home LTC/DOGE merged mining: The L2’s compact design and manageable power make it ideal for South African home miners wanting Scrypt dual-coin mining without industrial infrastructure.
• Load-shedding-resilient Scrypt mining: At home-scale wattage, the L2 is sustain able on a home inverter through South African load-shedding stages.
• Supplement to SHA-256 mining: Add LTC/DOGE exposure alongside Bitcoin mining operations at minimal additional electrical overhead.
• Entry-level Fluminer Scrypt mining: The L2 provides an accessible starting point in the Fluminer lineup before scaling to the L1 5.3G or L1 Pro 6G for higher hashrate.

Frequently Asked Questions

Does the Fluminer L2 work on South African power?
Yes. South Africa’s 230V / 50Hz supply is within the unit’s 100–240V input range. A dedicated 16A circuit is recommended. Confirm exact requirements at time of purchase.

What coins does the L2 mine?
The L2 mines Scrypt — primarily Litecoin (LTC) and Dogecoin (DOGE) through merged mining. Both coins earned simultaneously from every pool submission.

What pool should I use?
AntPool, ViaBTC, F2Pool, and Litecoinpool.org support LTC+DOGE merged mining. Configure the pool stratum URL in the L2’s web interface.

Can it handle load shedding?
Yes — at home-scale wattage, a standard home inverter and battery backup can sustain the L2 through typical South African load-shedding periods.

How does the L2 compare to the L1 5.3G?
The L1 5.3G delivers 5.3 GH/s at 1,200W — approximately 4.4× more hashrate at proportionally higher power consumption. Choose the L2 for lower power; choose the L1 for higher hashrate output.

What’s Included

• 1× Fluminer L2 1.2G mining unit
• Power supply (confirm inclusion at time of purchase)
• Power cables
• Quick-start documentation