Product Overview

The Fluminer L1 Pro 6G is a high-performance variant of Fluminer’s L1 Scrypt ASIC series, delivering 6 GH/s for Litecoin (LTC) and Dogecoin (DOGE) merged mining. The “Pro” designation indicates this is an upgraded performance variant over the standard L1 5.3G, offering additional Scrypt hashrate at a proportionally higher power draw. It targets operators who want maximum mid-range Scrypt output from the Fluminer L1 platform.

At 6 GH/s, the L1 Pro sits at the high end of the accessible home/semi-commercial Scrypt miner range, delivering meaningful merged LTC/DOGE mining output at a power level that’s substantial but still manageable with proper home or small commercial electrical infrastructure. Its power draw — estimated at approximately 1,300–1,400W — requires a dedicated circuit but stays below the 32A industrial tier required by the large commercial L9 and DG2 class miners.

For South African operators who want more Scrypt hashrate than the L1 5.3G delivers, but without the infrastructure commitment of 15+ GH/s commercial machines, the L1 Pro 6G offers a practical mid-point in the Fluminer lineup.

Key Features

• 6 GH/s Scrypt Hashrate (±5%): Top performance in the Fluminer L1 series. Delivers solid merged LTC and DOGE pool contribution from a single unit.
• Dual LTC + DOGE Merged Mining: Simultaneous Scrypt merged mining of Litecoin and Dogecoin — both coins earned from every share submitted at no additional power cost.
• ~1,300–1,400W Power Consumption: Dedicated circuit required, but below the industrial 32A threshold. Manageable for home mining rooms or small commercial setups with appropriate electrical planning.
• Air-Cooled Design: High-speed fans maintain operating temperatures. Suitable for ventilated home mining rooms or outbuildings.
• Standard Ethernet Interface: RJ45 connectivity with web-based management for pool configuration and monitoring.
• Compact Rack-Compatible Form Factor: Shelf or rack-mountable chassis suitable for small mining setups.
• Load-Shedding Manageable: At ~1,300–1,400W, a 3 kVA inverter with a 5 kWh battery can sustain the L1 Pro for approximately 3–4 hours through load shedding.

Technical Specifications

• Algorithm: Scrypt
• Supported Coins: Litecoin (LTC), Dogecoin (DOGE), and other Scrypt-based cryptocurrencies
• Hashrate: 6 GH/s (±5%)
• Power Consumption: ~1,300–1,400W (±10%)
• Power Efficiency: ~0.22–0.23 J/MH
• Cooling: Air-cooled, high-speed fans
• Input Voltage: 200–240V AC, 50/60 Hz
• Networking: 1× RJ45 Ethernet
• Operating Temperature: 0°C to 40°C
• Power Supply: Confirm inclusion at time of purchase

Power & Installation Notes

The Fluminer L1 Pro 6G draws approximately 1,300–1,400W continuously. In South Africa, a dedicated 20A circuit is the recommended minimum. South Africa’s 230V / 50Hz supply is within the unit’s 200–240V input range — no transformer needed. Engage a registered electrician for circuit installation, ensuring SANS 10142 compliance.

Load shedding: At ~1,350W, a 3 kVA inverter with a 5 kWh battery provides approximately 3.5 hours of runtime — covering Stage 2–3 load-shedding cycles. A 10 kWh battery extends this to approximately 7 hours, handling most Stage 4 scenarios.

Ensure adequate ventilation in the mining space. Active airflow management prevents heat build-up and maintains rated hashrate.

Electricity Cost Context — South Africa

At R2.80/kWh reference tariff, the estimated monthly electricity cost for the Fluminer L1 Pro 6G is:

(1,350 ÷ 1,000) × 24 × 30 × 2.80 = R2,721.60 per month

This is an operating cost estimate only — not a profitability projection. Actual tariffs vary by municipality and supply category.

Ideal Use Cases

• Mid-range home/semi-commercial Scrypt mining: The L1 Pro 6G delivers more hashrate than the L1 5.3G while staying below the industrial power tier — ideal for South African operators wanting more Scrypt output without full commercial infrastructure.
• Load-shedding-resilient Scrypt mining: At ~1,350W, the L1 Pro can be sustained on a properly sized home inverter, giving South African miners continued LTC/DOGE mining through load-shedding periods.
• Diversified mining alongside Bitcoin: Add LTC/DOGE Scrypt exposure via the L1 Pro alongside Bitcoin (BTC) SHA-256 miners in a diversified home mining operation.
• Upgrade path from L2 or L1 5.3G: Operators outgrowing the L2’s 1.2 GH/s or the L1 5.3G’s hashrate can step up to the L1 Pro for maximum Fluminer L1-series Scrypt output.

Frequently Asked Questions

Does the Fluminer L1 Pro work on South African power?
Yes. South Africa’s 230V / 50Hz supply is within the unit’s 200–240V input range. A dedicated 20A circuit certified by a registered electrician is recommended.

What is the difference between the L1 5.3G and L1 Pro 6G?
The L1 Pro 6G delivers 6 GH/s vs the L1 5.3G’s 5.3 GH/s — approximately 13% more hashrate at slightly higher power consumption. The Pro variant is for operators wanting maximum L1-series output.

Which pool should I use?
AntPool, ViaBTC, F2Pool, and Litecoinpool.org support LTC+DOGE merged Scrypt mining. Configure the stratum URL in the L1 Pro’s web interface and enable merged DOGE mining in your pool account.

Can it handle load shedding?
Yes — with proper inverter sizing. At ~1,350W, a 3 kVA inverter with a 5 kWh battery provides approximately 3.5 hours of runtime through load-shedding outages.

Is a PSU included?
Confirm PSU inclusion at time of purchase.

What’s Included

• 1× Fluminer L1 Pro 6G mining unit
• Power supply (confirm inclusion at time of purchase)
• Power cables
• Quick-start documentation